www.rfm.com e-mail: info@rfm.com page 1 of 5 ? 2009-2011 by rf monolithics, inc. SF2133E - 9/21/11 electrical characteristics electrical connections characteristic sym notes min typ max -20 to +70 c max -40 to +85 c units center frequency f c 1747.5 mhz insertion loss, 1710 to 1785 mhz il 2.6 4.0 4.1 db amplitude ripple, 1710 to 1785 mhz 1.6 2.5 2.8 db p-p attenuation referenced to 0 db: 10 to 1670 mhz 15 23 db 1670 to 1690 mhz 6 23.9 1805 to 1880 mhz 6 24 1880 to 4500 mhz 15 25 4500 to 5000 mhz 10 14 input/output vswr, 1710 to 1785 mhz 1.8:1 2.5:1 2.5:1 source impedance z s 50 ? load impedance z l 50 ? case style sm3030-6 3.0 x 3.0 mm nominal footprint lid symbolization (y=year, ww=week, s=shift) dot=pin 1 indicator 679, ywws standard reel quantity reel size 7 inch 500 pieces/reel reel size 13 inch 3000 pieces/reel connection terminals input 2 output 5 case ground all others sm3030-6 ? low loss saw filter surface mount 3.0 x 3.0 mm package complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units input power level 5 dbm dc voltage on any non-ground terminal 3 v operating temperature range -40 to +85 c storage temperature range in tape and reel -40 to +90 c maximum soldering profile, 5 cycles/10 seconds maximum 265 c 1747.50 mhz saw filter SF2133E 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 ? and measured with 50 ? network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depen dent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. "lrip" or "l" after the part number indicates "low rate initial production" and "eng" or "e" indicates "engineering prototype s." 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 7. us and international patents may apply. 8. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. pb caution: electrostatic sensitive device. observe precautions for handling. notes:
www.rfm.com e-mail: info@rfm.com page 2 of 5 ? 2009-2011 by rf monolithics, inc. SF2133E - 9/21/11
www.rfm.com e-mail: info@rfm.com page 3 of 5 ? 2009-2011 by rf monolithics, inc. SF2133E - 9/21/11
www.rfm.com e-mail: info@rfm.com page 4 of 5 ? 2009-2011 by rf monolithics, inc. SF2133E - 9/21/11 sm3030-6 case 6-terminal ceramic surface-mount case 3.0 x 3.0 mm nominal footprint top view bottom view 1 2 3 6 5 4 1 2 3 6 5 4 a bc d j ef gh i 679 ywws pcb footprint top view case and pcb footprint dimensions case materials dimension mm inches min nom max min nom max a 2.87 3.00 3.13 0.113 0.118 0.123 b 2.87 3.00 3.13 0.113 0.118 0.123 c 1.12 1.25 1.38 0.044 0.049 0.054 d 0.77 0.90 1.03 0.030 0.035 0.040 e 2.67 2.80 2.93 0.105 0.110 0.115 f 1.47 1.60 1.73 0.058 0.063 0.068 g 0.72 0.85 0.98 0.028 0.033 0.038 h 1.37 1.50 1.63 0.054 0.059 0.064 i 0.47 0.60 0.73 0.019 0.024 0.029 j 1.17 1.30 1.43 0.046 0.051 0.056 k 3.20 0.126 l 1.70 0.067 m 1.05 0.041 n 0.81 0.032 o 0.38 0.015 materials solder pad plating 0.3 to 1.0 m gold over 1.27 to 8.89 m nickel lid plating 2.0 to 3.0 m nickel body al 2 o 3 ceramic pb free
www.rfm.com e-mail: info@rfm.com page 5 of 5 ? 2009-2011 by rf monolithics, inc. SF2133E - 9/21/11 tape and reel specifications ?b? quantity per reel inches millimeters 7 178 500 13 330 3000 see detail "a" 1 3 . 0 2 0 . 2 2.0 12.0 1 0 0 r e f . " b " r e f . component orientation and dimensions carrier tape dimensions ao 3.35 mm bo 3.35 mm ko 1.40 mm pitch 8.0 mm w12.0 mm ro.3 (max.) ko section a-a 0.3 0.05 section b-b bo 2.0 4.0 ao pitch bb a r0.5 (max.) a 5 . 5 1 2 . 0 1 . 7 5 1.5 1.50 pin #1 user direction of feed 679 ywws
|
